GoToWebinar API Support

I am trying to get authorization code through python code but i am using below code .

```

initial_url = f"https://authentication.logmeininc.com/oauth/authorize?client_id={CONSUMER_KEY}&response_type=code"
response = requests.get(initial_url)
response_key = response.request.url.split("=")[-1]

```

but i get 200 Ok but could not get the code.

I tried looking into the documentation but did not find helpful.

1) I created a webhook
response:

{
	"_embedded": {
		"webhooks": [
			{
				"eventName": "registrant.added",
				"eventVersion": "1.0.0",
				"callbackUrl": "https://arch.al/webhook/",
				"product": "g2w",
				"webhookKey": "e51182da-1281-4cec-81ed-25037f8947ed",
				"state": "INACTIVE",
				"createTime": "2024-01-03T12:16:48.679Z"
			}
		]
	}
}

2) activated it:
3) checked its status:

{
	"eventName": "registrant.added",
	"eventVersion": "1.0.0",
	"callbackUrl": "https://arch.al/webhook/",
	"product": "g2w",
	"webhookKey": "e51182da-1281-4cec-81ed-25037f8947ed",
	"state": "ACTIVE",
	"createTime": "2024-01-03T12:16:48.679Z"
}

4) added a registrant via https://api.getgo.com/G2W/rest/v2/organizers/5418525674414955728/webinars/4038468162058771032/registrants

with this payload:

{
        "firstName": "John",
        "lastName": "Doe",
        "email": "7johndoe@example.com"
  }

{
	"registrantKey": 8774359412158568029,
	"joinUrl": "https://global.gotowebinar.com/sjoin/4038468162058771032/531390045",
	"status": "APPROVED",
	"asset": true
}

We have integration done on our wix website with go to webinar,

We used to have issue with expiring tokens, and they use to get expired in 30 days and we upload refresh token on the website and then it starts working again.

Recently we had an issue when someone try to click on the book now button it say requesting but never register a person on go to webinar.

I have check if there is any issue with code and i can see the following i hope someone would be able to help me to rectify this issue.

These are the errors we arw getting.

Running the code for the Home page. To debug this code in your browser's dev tools, open g0gqk.js.
wixSelector.ts:304 TypeError: $w(...).disable is not a function
at g0gqk.js:8:30
at t (wixSelector.ts:302:19)
at wixSelector.ts:317:27
at wixSelector.ts:119:48
at Array.map (<anonymous>)
at h (wixSelector.ts:119:31)
at Array.map (<anonymous>)
at Object.flushOnReadyCallbacks (wixSelector.ts:124:65)
at J (applications.ts:384:21)
at async Object.runAsyncAndReport (platformLogger.ts:204:10)
t @ wixSelector.ts:304
:1210 Unrecognized feature: 'vr'.
createConsoleProxy.ts:47 Running the code for the Webinars page. To debug this code in your browser's dev tools, open vb3tf.js.
staticEventsManager.ts:75 function dsWebinars_ready is registered as a static event handler but is not exported from the page code. Please remove the static event handler or export the function.
(anonymous) @ staticEventsManager.ts:75
3createConsoleProxy.ts:47 OK Requesting

Hello, 
we have create a sample php page with this code

$clientID = 'CLIENT ID DEL CLIENTE';
$response_uri = 'response_uri';
$curl = curl_init();
curl_setopt_array($curl, array(
  CURLOPT_URL => 'https://authentication.logmeininc.com/oauth/authorize?client_id='.$clientID.'&response_type=code&response_uri='.$response_uri,
  CURLOPT_RETURNTRANSFER => true,
  CURLOPT_ENCODING => '',
  CURLOPT_MAXREDIRS => 10,
  CURLOPT_TIMEOUT => 0,
  CURLOPT_FOLLOWLOCATION => true,
  CURLOPT_HTTP_VERSION => CURL_HTTP_VERSION_1_1,
  CURLOPT_CUSTOMREQUEST => 'GET',
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;

If he calls it he sees the behavior we get these page result:

if i call the url https://authentication.logmeininc.com/oauth/authorize?client_id=clientID&response_type=code&response_uri=response_uri 

directly from browser i see the corrected screen

Can you help me?

Thanks
regards.
B.

Is it intended that the organizerKey is not needed? I tried using `/rest/v2/organizers/{organizerKey}/webinars` endpoint and its seems the result is based off the fromTime, toTime and the token. I can pretty much put any value that is not blank to the organizerKey and it still works.

Can you please help me with below scenario?

1. I want to create webinar by enabling ManualApproval during registration.

2. I want to fetch all the registrants of the webinar and verify if they have entered a passcode during registration. If so, I need to approve the registrant. 

As far I understood, when user registers he will be in WAITING state. 

Is there any API to change the status of registrant from WAITING to APPROVED?

Thanks in advance

Hi folks,

I'm using this API to create a webinar and I made someone else a host.

https://developer.goto.com/GoToWebinarV2/#operation/createWebinar

But when I hit the following API to update the meeting, I'm not able to do that even if I'm an admin.

https://developer.goto.com/GoToWebinarV2/#operation/updateWebinar

I can't even hit other APIs  to add co-organizers like https://developer.goto.com/GoToWebinarV2/#operation/createCoorganizers

It says:

"Authentication succeeded, but access to the requested resource is denied."

Is there any special permission for admin so that I can do this stuff with my account. The problem is only when I make someone else a host and trying to update the webinar.

Thanks,

Aditya

No problem in Postman calling the API REST:

https://api.getgo.com/G2W/rest/v2/organizers/12341234123412341234/webinars?

with Headers: Accept, Authorization, Cache-Control, Content-Type and Host and with Parameters: fromTime and toTime.   The results are OK.

But when I try this in code, CLASSIC ASP calling MSXML2.ServerXMLHTTP.6.0 REST, the result is:

{"errorId":"f186c7ac-a8be-4fa3-a72a-63b68f027dce","requestId":null,"timeStamp":1614797938102,"reason":"invalid.data","errorCode":"invalid.data","description":"Required DateTime parameter 'fromTime' is not present","incident":"1048515592356393472","details":null}

This is the code:

url = "https://api.getgo.com/G2W/rest/v2/accounts/23232323/webinars?"

Dim oXMLHttp
Set oXMLHttp=Server.Createobject("MSXML2.ServerXMLHTTP.6.0")
oXMLHttp.open "GET", url, false
' HEADERS
oXMLHttp.setRequestHeader "Accept", "application/json"
oXMLHttp.setRequestHeader "Authorization", authorization_bearer_code
oXMLHTTP.setRequestHeader "Cache-Control", "no-cache"
oXMLHttp.setRequestHeader "Content-Type", "application/x-www-form-urlencoded"
'oXMLHTTP.setRequestHeader "Content-Type", "application/json;charset=UTF-8"
oXMLHTTP.setRequestHeader "Host", "api.getgo.com"

' PARAMETERS: WEBINARS FROM - TO
FromTime =Server.UrlEncode("2021-02-27T00:00:00Z")
ToTime =Server.UrlEncode("2021-03-03T00:00:00Z")
strData = "fromTime=" & FromTime & "&toTime=" & ToTime & ""

oXMLHttp.send strData
response.write oXMLHttp.responseText
Set oXMLHttp = Nothing
Response.status = 200

Can u help me, please?

The authorization_bearer_code is obtained in the same way, and the call is correct.

Thanks in advance

Hello,

I am trying to register users via the API endpoint https://api.getgo.com/G2W/rest/v2/organizers/{organizerKey}/webinars/{webinarKey}/registrants with a test body of

{"firstName": "Testname","lastName": "Lastname'","email": "string@test.de"}

I always get the error "Your request could not be processed because the request body is not parsable".

I sticked to the instructions here https://developer.goto.com/GoToWebinarV2/#operation/createRegistrant, tried with "Accept: application/json" and "Accept: application/vnd.citrix.g2wapi-v1.1+json" in the header.

Does anybody know this error and what could case it?